无法连接192.168.1.1 使用路由器

无法连接192.168.1.1 使用路由器

时间::2013-03-12 栏目: 192.168.1.1 作者: 冰凌 评论: 2 点击: 16556 次

外国佬们解决无法连接192.168.1.1 使用路由器的方法,翻译了一下,我E文水平差翻译很烂。
Connection may fail, in which case:
连接可能会失败,在这种情况下:
 
1. 192.168.1.1 is the default IP address of the router.
    检查192.168.1.1是不是路由器的默认IP 地址。
 
2. The TCP / IP properties of the computer used to configure the router settings are incorrect.
检查计算机的TCP / IP属性,用于配置路由器的设置是不正确的。
 
3. The router does not work, did not respond to a connection.
路由器不工作,没有响应的连接
 
4. Windows and other firewall enabled.
启用了Windows和其他防火墙。
 
5. The computer does not have to join the network.
计算机没有加入网络。
 
6. LAN network using the same router router in the 192.168.1.1 network segment.
在现有的192.168.1.1网段的路由器使用相同的路由器的LAN网络。

如果你觉得不错,也可以使用微信打赏一下:

打赏

微信扫一扫

版权所有:《192.168.0.1,192.168.1.1无线路由器,光猫, 基础知识-路由通》 => 《无法连接192.168.1.1 使用路由器
本文地址:https://nctoro.com/192-168-1-1/162.html
除非注明,文章均为 《冰凌》 原创,欢迎转载!转载请注明本文地址,谢谢。

无法连接192.168.1.1 使用路由器:目前有 2 条留言

发表评论



  1. # 板凳
    无线路由器怎么设置

    一姐们儿说:每天吃一个又大又甜的苹果,脸就会白白的。 然后一哥们儿回道:不用这么麻烦,喝凉水就行了,然后就拉肚子,一直拉到脸发白,好白好白的的……(得 这哥们儿一辈子别想找着媳妇了)

    来自:北京市 北京百度网讯科技有限公司BGP节点 2013-12-21 03:09 [回复]

  1. # 沙发
    亨sir

    我可能经常碰到的问题是3. The router does not work, did not respond to a connection.
    <br />还有那个D-LINK没有重启按钮真烦

    来自:广东省深圳市宝安区 电信 2013-10-02 12:27 [回复]

关注微信公众号